
What Is a GPS Repeater? GNSS Repeaters for Hangars Explained
A GPS (GNSS) repeater brings live satellite signals into hangars and test halls. How it works, where it is used, how it differs from a simulator and what to check before installing one.

A GNSS repeater — usually called a GPS repeater — brings real satellite signals into places they cannot reach: hangars, workshops, test halls and other enclosed spaces. An outdoor antenna receives the live GPS/GNSS signals, the repeater amplifies them and an indoor antenna re-radiates them, so receivers inside keep a position fix as if they were standing outside. This guide explains how a GPS repeater works, where it is used and what to consider before installing one.
Why GPS does not work indoors
GNSS signals come from satellites roughly 20,000 km away and are already extremely weak at ground level — below the noise floor. Roofs, walls and especially metal hangar structures attenuate them further, so a receiver indoors usually cannot acquire any satellites. For an aircraft parked in a hangar this means the navigation system cannot be checked without towing the aircraft outside.
How a GNSS repeater works
- Receive — a roof-mounted GNSS antenna with a clear view of the sky picks up the live satellite signals.
- Relay — the signal travels over coaxial cable to the repeater, which amplifies it and makes up for cable loss.
- Re-radiate — an indoor transmit antenna rebroadcasts the signal over the test area, where the aircraft or equipment receivers lock on to it.
Because the repeater passes on the real constellation rather than a simulated one, receivers see the same satellites and time they would see outdoors. The position they calculate is that of the roof antenna, which is why repeaters are used for functional checks rather than for precise indoor positioning.
GPS repeater vs GNSS simulator
A GNSS simulator generates artificial satellite signals for a scenario you define — useful in the lab for repeatable tests. A GPS repeater relays the live sky instead. For hangar maintenance, where the aim is to confirm that installed avionics acquire and track satellites normally, a repeater is the simpler and more representative tool.
Where GPS repeaters are used
- Military and civil aircraft hangars
- Avionics test and calibration areas
- UAV and robot integration labs
- Workshops where vehicles with GNSS receivers are serviced
What to check before installing a repeater
- Antenna position — the outdoor antenna needs an unobstructed view of the sky.
- Cable run — long coaxial runs add loss that the repeater gain must cover.
- Coverage — indoor antenna and gain should cover the test area without leaking signal outside the building.
- Interference — near active jammers or in harsh electromagnetic environments, an anti-jam version protects the received signal.
- Regulation — re-radiating GNSS signals is regulated in many countries, so installations should follow local rules.
Field reference: F-16 and F-4 hangars
In collaboration with the Presidency of Defence Industries (SSB) and the Turkish Air Force, Sağlamtek GNSS repeaters deliver live satellite signals to F-16 and F-4 aircraft inside closed hangars. Crews now check navigation systems in place instead of towing aircraft outside. The Sağlamtek GNSS Repeater is available in standard and anti-jam versions and is codified under NSN 5895-27-0716789 (NCAGE TL433).
Planning indoor GNSS for a hangar or lab? Read our GNSS antenna guide and anti-jam solutions comparison, or ask an engineer to size a repeater for your site.
